Seattle Forklift Training Schools

Seattle Forklift Training Schools - What Our Forklift Training Prgrams Could Do For Your Company

Are you searching for work as a forklift driver? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of forklifts, pre-shift inspection, fuel kinds and handling of fuels, and safe operation of a lift truck. Practical, hands-on training assists participants in acquiring fundamental operational skills. Course content comprises current regulations governing the operation of lift trucks. Our proven forklift courses are meant to offer training on these types of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

Do not lower or raise the fork whilst the lift truck is traveling. A load should not extend above the backrest because of the danger of the load sliding back toward the operator. Inspect for overhead obstructions and ensure there is enough clearance prior to raising a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it back slightly.

The lift truck is less steady when a load is in a raised position. Make certain that no body ever walks beneath the elevated fork. The operator should never leave the lift truck while the load is lifted.

While handling pallets, forks should be high and level enough to go into the pallet and extend all the way below the load. The width of the forks must provide equal distribution of weight.

Set the brakes and chock the wheels prior to loading and unloading the truck. The floors must be strong enough to support the weight of both the forklift and its load. Fixed jacks can be installed to be able to support a semi-trailer that is not coupled to a tractor. The entrance door height should clear the forklift height by a minimum of 5 cm. Edges of rail cars, ramps and docks should be marked and avoid them.

Click to Download the pdf