Seattle Scissor Lift License

Seattle Scissor Lift License - The is an inherent risk in operating a scissor lift, because with all types and kinds of powered work tools will require right handling to avoid accidents that can lead to injuries or damage. Companies have to make certain that workers utilizing this particular machine have the necessary qualifications.

Businesses must not permit scissor lifts to be used by untrained individuals. The scissor lift is utilized to lift people to high levels. Failure to understand and fully follow safety standard can result in injuries for the users or damage to the lift.

There are no regulations governing the use of fall protection for those who use scissor lifts. Nevertheless, manufacturers could suggest the use of fall protection and in some circumstances tying off in scissor lifts may be required by employer guidelines, job-specific risk assessments or local regulations.

Before using the machine, the scissor-lift operator has to perform a thorough check to be able to ensure the machinery is in good working condition. This is the operator's job, even if the unit has already been in service that day. The operator's instruction manual of the equipment contains a checklist for pre-operation.

Examples of what to look for when performing a pre-operation inspection include checking tire-inflation pressure, and checking controls in the platform and ground controls to ensure they are functioning. When retracting or extending the boom, look for delayed movement on the fly section that could indicate cables are loose. Whilst operating the controls, make sure that the emergency stop switches are working. Operate functions against the machine's cutout switches. Check the boom control system by cycling a boom lift to the furthest extent of its operating envelope. Safety limiters must automatically stop the unit before it moves into an unstable position, if they are working properly. If they aren't, turn off the lift and ensure that it is repaired before utilizing it for a second time.

Safe operating procedures must be followed at all time, with the levers being operated with controlled, even pressure. A control lever should never be pushed from one position to the opposite position. The lever must be shifted to neutral, before stopping, and after that proceeding in the desired direction. When released, control switches and levers should automatically return to the neutral position. Depress the foot switch before operating platform controls.

Click to Download the pdf